Archives

← Back to All Archives

Volume 6, Issue 3 — March 2020

Vol. 6 No. 3: Volume 6 Issue 3 (March-2020)

8 papers published | e-ISSN: 2455-2585

📚 Published Papers 8 papers

Vol. 6, Issue 3 · March 2020 · ID: IJT-2021-8F80B7

Encryption Data Webhouse of Enterprise Information System

Dhuha Khamees Khalaf , Murtadha M. Hamad · Department of Computer Science, University of Anbar, IQ

Research Paper Pg. 01-05

Keywords: Webhouse, Enterprise Information System, Advanced Encryption Standard AES, WebOLAP, Web Analysis

Vol. 6, Issue 3 · March 2020 · ID: IJT-2021-DB5567

Addressing Hardware Based Security Techniques in Internet of Things (IoT)

Gurdeep Kaur , Ramandeep Kaur, Paramjeet Singh · Department of Computer Science, GSSDGS Khalsa College, Patiala – 147001, India, IN

Research Paper Pg. 06-12

Keywords: Internet of Things (IoT), hardware security, SoC, Hardware Root of Trust (HRoT), Physical Unclonable Function (PUF),DICE.

Vol. 6, Issue 3 · March 2020 · ID: IJT-2021-A4C4D4

SEISMIC RESPONSE OF ASYMMETRIC REINFORCED CONCRETE STRUCTURES USING STATIC PUSHOVER AND ADAPTIVE PUSHOVER ANALYSIS

Ankit Solanki , Palak Trivedi, Urvi Rathod · PG Student, Civil Engineering Department, IN

Research Paper Pg. 13-17

Vol. 6, Issue 3 · March 2020 · ID: IJT-2021-1E677E

Micromechanical properties of concrete with partial replacement of cement with Diatomaceous earth

Y. Madhusudhan Reddy , Dr T.Chandra Sekhar Reddy

Research Paper Pg. 18-26

Keywords: Diatomaceous earth, pozzolanic material,Mechanical properties, compressive strength, split tensile strength.

Vol. 6, Issue 3 · March 2020 · ID: IJT-2021-21C096

Colour Image Watermarking based on Wavelet and QR Decomposition

Divya Audichya , Dr.Vikas Soni · M.Tech, Department of Digital Electronics, IN

Research Paper Pg. 27-37

Keywords: Video Watermarking, Biometric Random key Generation, Mixed Key Cryptography, LSB Watermarking

Vol. 6, Issue 3 · March 2020 · ID: IJT-2021-FCA2CF

A Review Study of Elevated water tank Analysis

Rohit Vishwakarma , Asst. Prof. Kuldeep Pathak · Vikrant Institute of technology and management, Gwalior, IN

Research Paper Pg. 38-45

Keywords: RC Elevated water tank, Static analysis, Finite element Method, ANSYS Software.

Vol. 6, Issue 3 · March 2020 · ID: IJT-2021-F8C628

Evaluation of Durability Index for Medium Strength Concrete

Mr. T. F. Alitha , Dr. J. D. Rathod · Lecturer in Civil Engineering Department, Government Polytechnic Godhra, IN

Research Paper Pg. 46-54

Keywords: Concrete, Durability index, Oxygen permeability, Sorptivity, Chloride conductivity.

Vol. 6, Issue 3 · March 2020 · ID: IJT-2021-89FBA0

Experimental Investigation of Injection Parameters on Engine Performance Using Neem Biodiesel and Optimization using Taguchi Method

Harish chandra V Astagi , Dr. Prashanth Kamble, Dr. M C Navindgi · Ph D Scholar, Department of Mechanical Engineering, PDA college of Engineering, Kalaburagi, IN

Research Paper Pg. 55-73

Abstract: the petroleum products are in greater demand as a result of enormous increase in the number of automobiles in recent years, with estimation of crude oil reserves to last only for a few decades. Therefore, researches are being conducted to make an alternative to diesel. Transport sectors would be majorly impacted due to the depletion of crude oil. In developing the country a major significant role is played by Fossil fuels and for the sustenance and further development continuous supply of fuel with increasing rate must be ensured. The neem biodiesel can be regarded as potential feedstock for power generation. The present study was to optimize the injection parameters of the diesel engine, blends of neem biodiesel, diethyl ether additive concentration and bring out optimize set of operating variables using Taguchi method theoretically. The experimentation was carried using diesel, neem biodiesel and its blends N20D5 (20% biodiesel, 75%diesel, 5%diethyl ether additive), N20D10, N30D5, N30D10, N40D5, N40D10, N100 (pure neem biodiesel). Injectors with 3holes, 4holes and injection pressures 180 bar, 200 bar and different loading conditions (0%,20%,40%,60%,80%,100%) were used to study their effect on the performance and emissions on a single cylinder, 4stroke, naturally aspirated diesel engine. The experimental results shown that, the engine performance and emissions were better at higher set of operating variables. Taguchi method was used for optimization and analysis was carried out using “Minitab-18” statistical software. The Taguchi analysis identified that 200 bar injection pressure, nozzle hole geometry with 4 holes, 10% additive concentration under 4.16 KW of brake power (80%) were optimum parameters setting for engine brake thermal efficiency. For BSFC 180 injection pressure, 3 holes’ injector holes, 5% additive concentration, blend 40 and load 3.12KW and for emissions 200bar injection pressure, 4-hole injector, 10%additive concentration, blend 40, load of 5.2KW were optimized. It was clearly observed that, the engine performance and emissions were largely influenced by engine load, blends and least influenced by injector holes, injection pressure. Thus the present investigation shown that neem biodiesel can be used as an alternative fuel in diesel engines without significant engine modification.

Keywords: Diesel, neem biodiesel, diethyl ether (DEE), Performance, emissions, Taguchi method.

Quick Links

Journal Info

ISSN	2455-2585
UGC No.	47719
Frequency	Monthly
Access	Open Access

Volume 6, Issue 3 — March 2020

Quick Links

Journal Info

Downloads