EFFECT OF EQUAL CHANNEL ANGULAR PRESSING ON THE MECHANICAL PROPERTIES OF AL 4032–SiO2 NANO COMPOSITE MATERIAL

Authors

  • Ms. S. Hemani M.Tech CAD/CAM (Pursuing), Pragati Engineering Collage
  • Mr.Avinash Gudimetla Associate Professor, Department of Mechanical Engineering, Pragati Engineering Collage, Surampalem
  • Dr.S.Sambhu Prasa Professor, Department of Mechanical Engineering, Pragati Engineering Collage, Surampalem

Keywords:

AL 4032, SiO2, Composite Material, Stir-Casting, ECAP, & Mechanical Properties.

Abstract

The objective of the present study is to analyze the effect of Equal Channel Angular Pressing (ECAP) on the mechanical properties of Al4032–SiO2 composite. These composites have been prepared by stir casting route in which the weight % SiO2 nano particles are 0.25, 0.5, 0.75 and 1wt%.The ECAP process is done at a room temperature using a die with channel angle of 105o and corner angle 300. The influence of ECAP on mechanical properties of Al4032 –SiO2 composite is evaluated. In general in any composite the distribution of reinforcement particles can be observed with the micro-structural examination, but the effect of ECAP will be there on the mechanical properties of composite, so that here we have taken the evolution of Al4032-SiO2 mechanical properties before and after ECAP process. As the agenda of ECAP is to improve the mechanical properties we have observed the great improvement in the mechanical properties.

Downloads

Published

2021-11-11

How to Cite

Hemani, M. S., Gudimetla, M., & Prasa, D. (2021). EFFECT OF EQUAL CHANNEL ANGULAR PRESSING ON THE MECHANICAL PROPERTIES OF AL 4032–SiO2 NANO COMPOSITE MATERIAL. International Journal of Technical Innovation in Modern Engineering & Science, 4(6), 352–359. Retrieved from https://www.ijtimes.com/index.php/ijtimes/article/view/1399

Issue

Vol. 4 No. 6 (2018): Vol. 4 No. 6: Volume 4 Issue 6 (June-2018)

Section

Articles