REVIEW ON HYBRID ALUMINIUM METAL MATRIX COMPOSITES

Authors

  • Vandana Yadav Department of Mechanical Engineering, National Institute of Technical Teachers Training and Research, Chandigarh, India 160019
  • Dr. P. Sudhakar Rao Department of Mechanical Engineering, National Institute of Technical Teachers Training and Research, Chandigarh, India 160019

Keywords:

Hybrid aluminium matrix composites; Microstructural studies; Mechanical properties; SEM; Stir casting ; dry sliding wear

Abstract

Now a day’s single reinforced composites are replaced by hybrid composite due to tailorable properties. Aluminium alloys are generally used in aerospace and automobile industries due to their better properties such as high stiffness and specific strength, good corrosion and wear resistance, low coefficient of thermal expansion etc. The purpose of present study is to provide detail review on mechanical and tribological performance of hybrid aluminium matrix composites fabricated with different combination of reinforcement filler. The different methods of fabrication for these composites are also reviewed. It is concluded form most of the research papers that mechanical and tribological properties of composites are enhanced with different combination of reinforcement and increase in percentage addition of reinforcement.

Downloads

Published

2021-11-22

How to Cite

Yadav, V., & Rao, D. P. S. (2021). REVIEW ON HYBRID ALUMINIUM METAL MATRIX COMPOSITES. International Journal of Technical Innovation in Modern Engineering & Science, 5(1), 166–170. Retrieved from https://www.ijtimes.com/index.php/ijtimes/article/view/2198

Issue

Vol. 5 No. 1 (2019): Vol. 5 No. 1: Volume 5 Issue 1 (January-2019)

Section

Articles

Most read articles by the same author(s)

1 2 > >>